Diesel Fuel

SAVE UP TO 5% ON FUEL CONSUMPTION WITH micfil

The high injection pressure of modern diesel engines requires clean and water-free fuel. Standard filtering is not sufficient in many cases.

 

The high particle filtering power of the micfil ultra-fine filter of up to 0.5 μm, the absorption of water (in contrast to a standard filter) and the removal of bacteria make the micfil ultra-fine filter a very effective fuel filter. Injection nozzles and pumps, as well as piston rings are protected and their service life is significantly extended. Particles do not get into the oil via the piston rings.

CLOSED-CIRCUIT FILTRATION SYSTEM RANGE FOR STORAGE

The design of fixed solutions in a closed circuit, whatever the size of the tank, makes it possible to preventatively and / or curatively secure the operation of the installation and ensure the quality of its contents. Permanent filtration or programmed to 0.5 micron eradicates all risks of pollution (water, bacteria, sediment ...).

After training in our systems, the operators can carry out at any time quality control operations that may include cleaning the installation.

 

The main advantages for storage

  • Protection against pollution (water, sediment, bacteria ...)
  • Maintaining cleanliness filtration with up to 0.5 micron
  • Homogenization of content
  • Caters to all sizes of fuel tanks
  • Full use of storage
  • Few deposits / sludge at the bottom of the tank.

 

FUEL FILTERS 0.5 MICRON FOR DIESEL ENGINES

The micfil 0.5 micron filter range is the ultimate engine defense.

The filtration obtained by this range allows the elimination in the circuits of particles larger than 0.5 micron. The cartridges have a high capacity for contaminant absorption, last a long time while allowing high flows with negligible pressure losses, and they absorb water.

Filtration of fuel (injected) at 0.5 micron is suitable for all types of fuel or fuel.

The filter holders can be installed on any type of machinery and equipment, the filter-holders are mounted on the fuel supply circuit, between the tank and the manufacturer's filtration system.

The main benefits are:

  • Ultra-filtration of the particles up to 0.5 micron filtration - greater than 20 times a standard filter -
  • Retention of free or dissolved water
  • A fuel of quality superior to the standard
  • Decrease of engine abrasion
  • Clean and keep clean injectors, nozzles pumps
  • Reduces wear
  • Better combustion resulting in fuel savings
  • Reduction in polluting emissions and volatile organic compounds
  • Decreases maintenance overhaul and repair costs - reducing capital costs
  • Maintains manufacturer 's guarantee

HYDROCARBON FILTRATION INTERVENTIONS IN DEPOT OR ON SITE

POLLUTION? CONTAMINATION? WE HAVE THE SOLUTION !

micfil Australia can intervene on site to carry out the filtration of storages of fuels.
FDJ and micfil have created a new mobile intervention service to filter on-site to eliminate pollution due to excessive water or other contaminants in fuel or fuel storage and tanks without loss of product.

Contact us to carry out a technical evaluation and analyzes of your product before and after filtration by micfil Australia. Analyzes are performed by the independent laboratory of your choice to measure compliance with the standard for your product before and after our filtration operation.

 

OUR SERVICES :

• On-site intervention
• Micro-filtration of the contents of the fuel storage tanks
• Separation of dissolved water and free water
• Micro-filtration in bypass of contaminants
• Analysis before / after filtration